Where is the cable bridge busbar slot device used?

在我國，跟著經濟的開展，不斷有高層建筑被締造出來，現如今已存的樓房竟高達六百多米，假如想要這個高層建筑正常運作下去，則需求十分巨大的電能，這時候母線槽的效果就凸顯出來了。母線槽是一個十分理想的傳導設備，可以的運輸電流，使這些需求巨大電能的場所可以正常運作。

In our country, with the development of economy, high-rise buildings have been constructed continuously. Now the most existing buildings are as high as 600 meters. If we want this high-rise building to operate normally, we need enormous electric energy. At this time, the effect of busbar trench is highlighted. Busbar groove is a very ideal conduction equipment, which can efficiently transport current, so that these places with huge demand for electrical energy can operate normally.

跟著現代化工程設備和配備的呈現，各行各業的用電量迅增，尤其是眾多的高層建筑和大型廠房車間的呈現，作為輸電導線的傳統電纜現在大電流運送體系中已不能滿足要求，多路電纜的并聯運用給現場裝置施工銜接帶來了諸多不便。

With the emergence of modern engineering equipment and equipment, the power consumption of all walks of life is increasing rapidly, especially the appearance of many high-rise buildings and large workshop. The traditional cable as transmission wire can not meet the requirements in the high-current transmission system, and the parallel application of multi-channel cable brings about the connection of field installation construction. How inconvenient.

插接式母線槽作為一種新型配電導線應運而生，與傳統的電纜相比，在大電流運送時充分體現出它的優越性，一起由于采用了新技術、新工藝，大大降低的母線槽兩頭部銜接處及分線口插接處的觸摸電阻和溫升，并在母線槽中運用了高質量的絕緣材料，然后提高了母線槽的可靠性，使整個體系愈加完善。

As a new type of distribution conductor, plug-in busbar groove emerges as the times require. Compared with traditional cables, it fully shows its superiority in high-current transportation. With the adoption of new technology and technology, the touch resistance and temperature rise at the junction of busbar groove and the junction of branch port are greatly reduced, and it is also in the busbar groove. The use of high-quality insulation materials, and then improve the safety and reliability of the bus groove, so that the whole system is more perfect.

母線槽特點是具有系列配套、商品性車產、體積小、容量大、規劃施工周期短、裝拆便利、不會焚燒、可靠、運用壽命長。母線槽產品適用于溝通50Hz,額外電壓380V,額外電流250A-4000A的三相四線，三相四線制供配電體系工程中。

Busbar groove is characterized by a series of matching, commercial vehicle production, small size, large capacity, short planning and construction cycle, easy assembly and disassembly, not incineration, safe and reliable, long service life. Busbar groove products are suitable for communication 50Hz, extra voltage 380V, extra current 250A-4000A three-phase four-wire, three-phase four-wire power supply and distribution system engineering.

濟南航豐實業有限公司，山東電纜橋架感興趣的朋友可以關注我們的官網http://www.chenchen1688.com

Jinan Hanfeng Industry Co., Ltd., Shandong cable bridge interested friends can pay attention to our official website http://www.chenchen1688.com